► Includes 2 x 1-Button Remotes (as pictured): The RS1Z-VSS™ includes two 1-button remotes that get up to 1000 feet of remote starter range.
► Safety 2-Press Remote Start Activation:
The remote starter is activated by pressing the remote start button on the remote 2X within 3 seconds. This setting helps prevent any accidental activation that could occur with a single press activation setting.
► Pre-Heat/Pre-Cool Activation:
Pre-setting your vehicle's heat settings prior to exiting your vehicle will enable you to pre-warm the interior and defrost the windshield when your vehicle is running via the remote starter. Same with the vehicle's AC, just pre-set the AC settings where you like it and it will pre-cool the interior on those hot days from it sitting in the sun.
► Multiple Remote Start Run Times:
The system has multiple remote start run times: Choices are 5, 10, 15, 20, 45 or 60 minutes (10 minutes is the default setting). You can easily adjust the run time yourself anytime after installation.
► Parking Lights Confirmation:
Visual confirmation that you activated the remote starter: The system will flash the vehicles parking lights 1X right after you activate the remote starter and then turn the parking lights on solid shortly afterwards to indicate that the vehicle is running via the remote starter.
► Quick-Stop Mode:
A cool feature that allows you to keep the engine running without having to leave the keys in the ignition: While the engine is still running with the keys, you press the remote start button on the remote 2X and when you turn off the ignition and remove the keys the engine will remain running for the duration of the remote start run time.
► Safety Brake Pedal Shut-Down Input:
Mandatory connection that will immediately shut down the remote starter system if you step on the vehicle's brake pedal before you put the key's into the ignition and turn the ignition on (a.k.a. "key-take-over" feature).
► Valet/Remote Start ON/OFF Service Mode:
The system includes a valet mode where the remote starter feature can be temporarily turned off inhibiting the remotes from being able to activate the system.
► Windshield Mounted Antenna w/Built-In Programming/Valet Button & Status LED:
Commonly mounted at the top inside center of the vehicle's windshield directly behind the rear-view mirror for optimal operating range. The antenna conveniently incorporates both the system's programming/valet button and status LED. This eliminates any hole drilling in the vehicle's dash and reduces the amount of wire's needed to be run under the dash during installation.
► Diesel Compatible/Adjustable Delay Timer:
Programmable crank delay settings for Diesel engines. The system will be pre-set for you with any of the pre-set times available. Your choice of "wait-to-start" times are: 10, 15, or 20 seconds before crank to allow for proper glow-plug warming. You will be able to easily change this setting if need be after installation.
► Auto-Sense Tachless Mode:
After installation is complete just start the vehicle 4X with a key letting the vehicle run for at least 10 seconds each time and the system will sense the vehicle's voltage & amperage levels along with the crank time and save the readings average to memory and then apply the same signal to the vehicle's starting circuit after the remote starter is activated.
► Vehicle Compatibility Guarantee:
The RS1Z-VSS™ is available for the majority of vehicles equipped with automatic transmissions only, gas or diesel engines and standard keyed ignition systems (vehicle's without push-to-start buttons). After you place your order one of our technicians will look over your order to confirm vehicle compatibility and if in the rare event that we don't have a VSS™ system available for your specific vehicle they will email you within 24 hours and automatically cancel your order.
► 3 Year Limited Warranty:
Repair or replace any part of the system thats found to fail from normal every day use for a period of 3 years from date-of-delivery (1 year on remotes).
► Includes Flashlogic™ Bypass Interface Kit:
Includes vehicle specific ready Flashlogic brand bypass interface kit required for vehicles equipped with factory anti-theft systems (a.k.a. Transponder Keys, PATS, Sentry Keys, PASSLOCK-II etc).
► Tech Note: This system does not have the ability to unlock a vehicle's power door locks. To have this feature you would need the RS3Z-VSS system or up.