TOPIC: "How do Remote Starters work on a Vehicle with a Manual Transmission?"
ANSWER: First, of course, you have to have a remote starter specifically designed to be installed on a vehicle with a manual transmission. These systems have what they call a safety “remote start ready mode”…basically meaning the vehicle could not be remote started if left in gear. Then, basically, it’s installed exactly as if the vehicle had an automatic transmission with a few additional connections. Which commonly are one more connection to the vehicle’s parking brake (or e-brake), one to the vehicle's clutch activation wire, and one to the driver’s door pin-switch…How it works: While the engine is still running with the keys, after you park, you set the parking brake, put the vehicle in neutral, and then press the remote starter activation button on the systems’ remote. The vehicle’s dash lights will flash and the horn will beep once indicating that the vehicle has entered the “remote start ready mode”. Then, when you turn off the ignition and remove the keys the vehicle will remain running…then you exit the vehicle, shut the door, and press the remote start button on the remote again. This will shut down the vehicle, now the vehicle is ready to be remotely started.