TOPIC: NO REMOTE START, JUST FLASHES PARKING LIGHTS 6 or 7 TIMES:
QUESTION: "Recently had my vehicle serviced and now when I go to activate my remote starter, instead of activating, it just flashes the parking lights 7X. It's my understanding that the remote starter system lost its tachometer signal programming...can I somehow reprogram it myself, and if so how, or do I have to take it into a shop?"
ANSWER: On all current and "not so current" Code Alarm, Prestige, and Pursuit remote starter systems you can re-program the tach signal to the system yourself. Each step has to be done rather quickly, here's what you do: Turn the ignition ON (Do not start the vehicle)...press and release the button on the systems' antenna 3X...then immediately turn the ignition OFF, Now, press and hold the button in on the antenna, and while still holding the button in, start the vehicle with the key...within a few seconds, while still holding the button in, the vehicle's dash lights will begin to flash 1X every few seconds...keep holding the button in for at least 6 flashes...the flashes mean that the system is reading the vehicle's tach signal...after 6 flashes are seen, release the button, the dash lights will turn ON solid for 2 seconds and then shut OFF (some systems may even beep the horn 1X). This is the indication that the system has learned the vehicle's tachometer signal. Now turn OFF the ignition, remove keys, and test remote start activation.
TECH TIP #55 UPDATE: Report of just 6 Flashes instead of remote starting: 6 flashes indicate a change in the vehicles' tachometer signal that the system is not recognizing. Re-programming the tach, as indicated above, should also fix the problem.