Step 1: Turn Ignition ON (DO NOT start the vehicle): Press & release the button on the system's antenna 3X: Dash lights and horn will beep 1X in response (if system has horn output feature):
Step 2: Turn ignition OFF & ON again: system will flash the dash lights and beep the horn 2X:
Step 3: Turn ignition OFF & ON again: system will flash the dash lights and beep the horn 3X:
Step 4: Press & release the button on the system's antenna 3X slowly: LED on antenna will flash in a 3 flash/pause/3 flash pattern in response:
Step 5: Press & release the LOCK button on the remote (or the 1 button on 1 button remotes): the dash lights and horn will beep in response. The number of flashes/beep per-press of the remote's button will indicate the current run time setting:
Step 6: Just keep press & releasing the remotes button until the number of flashes/beeps corresponds with the run time setting you desire: 1 = 5 Mins. 2 = 10 Mins. 3 = 15 Mins. 4 = 20 Mins. 5 = 45 Mins. 6 = 60 Mins.
Step 7: After the desired setting is chosen turn the ignition OFF, wait, the system will sound within 5 secs. Done.