Reported Issue: Remote Starter tries to Start 3 times then Stops (Ignition turns ON, no crank)
Application: During new install testing or existing system that worked fine prior to current problem
Possible Cause(s): Several situations can cause this problem: #1: May need additional bypass kit to complete installation or bypass kit not programmed properly (new install) or system lost bypass kit programming (pre-working system). #2: Using tachless-mode and the tachless mode is not picking up enough voltage level (new install). #3: Wrong or bad connection to vehicles' starter wire or one of the two constant power wires to the remote starter system that relays' momentary power to the starters crank output wire is not getting constant power (bad or wrong connection).