Flashlogic FLRSCH4 INSTALLER TESTIMONIALS:
→"Works Great and Easy to Install. Excellent Instructions!! Well worth the Money! You can do this Install yourself even if you aren't a mechanic like me. Took me about 30 minutes from start to finish, Would have been quicker but I had to pull the center dash loose to get enough of the dash loose to get to the back of the key switch. As long as you give the correct info for them to Flash the unit it's just a matter of plugging it in and reading the instructions and programming the key. There are plenty of youtube Videos on how to install these units also. I didn't put the hood switch in yet (I'll do that when the weather is warmer) but I did hook in the marker light wire. I couldn't believe that a few other shops wanted anywhere from $280 to $400 to purchase and install this. This is definitely well worth the money and time.
→"Super easy install! Wife loves it for her car. It was super easy to install and only took about 20 min in 10 degree weather. I recommend this to anyone looking to put in a remote starter. The module came preconfigured for her vehicle and programming was as easy as it gets. Local shops wanted $250 for a remote start and this was less than $150 plus it works with your factory FOB so no need to have yet another FOB on your keyring. Couldn't go wrong."
→"Works Great in my 2016 Dodge Grand Caravan. This was one of the best purchases I have made for my van. The set-up is pre-flashed so I didn't have to buy the extra stuff for it. It came on time and was not damaged. It took me only about 20 minutes to install it. At first I did not think I needed the parking light feature but after using it for a day I defiantly wanted it. So I had to take the dash back apart and wire in the parking light feature. It was totally worth it do it the first time. It may take you a bit more time but its worth it. Hardest part about the install was trying to unplug the wires from behind the dash. There is not much room to work with so it may be tricky. It was also nice that they already had the parking light wire figured out for you. So I just used a simple not cut wire connector and spliced it together. I am looking at getting another one for my brother in law."
→"Works great, easy install. Super easy to install on a 2013 durango. Unplug the harness that goes to the key switch then plug that harness to the flashlogic. Take flasblogic harness and plug into the key switch. From there, programming the fob takes about 5-10 seconds...Been installed for about a week and so far so good."
→"Can't beat it!! For the price you can't get anything better. Great quality with a super easy install! Literally took me 20 minutes! It works great every time and I wish I did it sooner! So glad I went this route instead of having my dealer install a factory kit for upwards of $500!!"