DIY Prestige 901TM-VSS Vehicle Specific System Remote Starter Kit

Every 901TM kit arrives at your door complete with all the parts and information you'll need to install the system into your specific vehicle. No additional parts or information required.

The Prestige 901TM-VSS™ is available in the vehicle specific system platform available for over 500 vehicles. Pre-order this system for the exact year, make and model of vehicle your going to install the system into. Delivered to your door with no additional parts required, vehicle information or pre-programming needed before the installation, just go straight from box to installation.

Since 2002 our VSS line of remote car starter and alarm systems have been designed with the novice installer in mind where 100% of the "DIY" prep-work is already done for you. No sitting with a lap full of spaghetti-wire trying to figure out what wire from the system connects to what wire in the vehicle, where the wire is located and how to confirm that you found the correct wire in your vehicle. Each system's wiring harness is set-up for your specifc vehicle.

Complete Vehicle Specific System

 901TM-VSS System Highlights

• Includes 2 x 1-Button Remotes
• Up to 1500' Range
• Parking Lights Confirmation
• Mutiple Remote Start Run Times
• Gas and Diesel Compatible
• Quick-Stop Mode
• HVAC Activation

Prestige 901TM-VSS Remote Starter System Features:

• Includes 2 x 1-Button Remotes: Includes two 1-button remotes that get up to 1500 feet of remote starter range.
   
• Safety 2-Press Remote Start Activation: The remote starter is activated by pressing the remote start button on the remote 2X within 3 seconds. This setting helps prevent any accidental activation that could occur with a single press activation setting.
   
• HVAC Control. Pre-Heat/Pre-Cool Activation: Pre-setting your vehicle's heat settings prior to exiting your vehicle will enable you to pre-warm the interior and defrost the windshield when your vehicle is running via the remote starter. Same with the vehicle's AC, just pre-set the AC settings where you like it and it will pre-cool the interior on those hot days from it sitting in the sun.
   
• Multiple Remote Start Run Times: The system has multiple remote start run times: Choices are 5, 10, 15, 20, 45 or 60 minutes. You can easily adjust the run time yourself anytime after installation
   
• Parking Lights Confirmation: Visual confirmation that you activated the remote starter: The system will flash the vehicles parking lights 1X right after you activate the remote starter and then turn the parking lights on solid shortly afterwards to indicate that the vehicle is running via the remote starter.
   
• Quick-Stop Mode: A cool feature that allows you to keep the engine running without having to leave the keys in the ignition: While the engine is still running with the keys, you press the remote start button on the remote 2X and when you turn off the ignition and remove the keys the engine will remain running for the duration of the remote start run time.
   
• Safety Brake Pedal Shut-Down Input: Mandatory connection that will immediately shut down the remote starter system if you step on the vehicle's brake pedal before you put the key's into the ignition and turn the ignition on (a.k.a. "key-take-over" feature).
   
• Remote Unlock Output: This system has the ability to remotely unlock your vehicles doors when its running by the remote starter in case your factory remotes don't work when the engine is running.
   
• Valet/Remote Start ON/OFF Service Mode: The system includes a valet mode where the remote starter feature can be temporarily turned off inhibiting the remotes from being able to activate the system.
   
• Windshield Mounted Antenna w/Built-In Programming/Valet Button & Status LED: Commonly mounted at the top inside center of the vehicle's windshield directly behind the rear-view mirror for optimal operating range. The antenna conveniently incorporates both the system's programming/valet button and status LED. This eliminates any hole drilling in the vehicle's dash and reduces the amount of wire's needed to be run under the dash during installation.
   
• Diesel Compatible/Adjustable Delay Timer: Programmable crank delay settings for Diesel engines. The system will be pre-set for you with any of the pre-set times available. Your choice of "wait-to-start" times are: 10, 15, or 20 seconds before crank to allow for proper glow-plug warming. You will be able to easily change this setting if need be after installation.
   
• Auto-Sense Tachless Mode: After installation is complete just start the vehicle 4X with a key letting the vehicle run for at least 10 seconds each time and the system will sense the vehicle's voltage & amperage levels along with the crank time and save the readings average to memory and then apply the same signal to the vehicle's starting circuit after the remote starter is activated.
   
• Vehicle Compatibility Guarantee: The 901TM-VSS is available for the majority of vehicles equipped with automatic transmissions only, gas or diesel engines and standard keyed ignition systems (vehicle's without push-to-start buttons). After you place your order one of our technicians will look over your order to confirm vehicle compatibility and if in the rare event that we don't have a VSS™ system available for your specific vehicle they will email you within 24 hours and automatically cancel your order.
   
• Includes any Required Flashlogic™ Bypass Interface Kit: Includes vehicle specific ready Flashlogic brand bypass interface kit required for vehicles equipped with factory anti-theft systems (a.k.a. Transponder Keys, PATS, Sentry Keys, PASSLOCK-II etc).
   
• 2 Year Warranty: MotorCityRemotes.com will repair or replace any part of your system that's found to fail from normal every day use for a period of 2 years from date-of-delivery (1 year on remotes). 

 Step-by-Step Vehicle Specific Installation Guide: 
No sitting with a lap-full of spaghetti-wire, no info to download or videos to watch and no jumping back-and-forth from vehicle wiring chart to system manual to figure out what wires are needed and not needed to connect to your vehicle. Each VSS system includes a concise step-by-step vehicle specific installation manual that clearly indicates what wire from the system connects to what wire in the vehicle, where the wire is located (the majority of our manuals also include photo's) and how to easily confirm that you found the correct wire using the VSS kits supplied LED style test probe.

 LED Style Test Probe: 
No need for using awkward multi-meters that indicate voltage level's that can confuse polarity readings and require the use of two probes and a bare spot on the wire in order to take a reading. Each of our VSS kits includes an easy to use LED style test probe to use along with the VSS kits step-by-step vehicle specific installation manual. This test probe simplifies the procedure of testing for the correct wire in your vehicle by lighting a green or red LED to indicate the target wire's polarity (explained in each step of the vehicle specific install manual)

 Installation Connector Kit:
Each VSS system includes 3 different sizes of quick-connect "T-Tap" connectors with pre-crimped insulated male spade connectors on the ends of the system's wiring for making quick connections from the system to the vehicle's wiring. Also included are crimp cap connectors for connecting wires end-to-end and self-tapping screws with ground loop connectors for making chassis ground connections. Also supplied are nylon zip ties for securing wiring, control module and sensor under the dash.

 Includes Vehicle Specific Extras: 
We know the inconvenience of getting into the middle of an installation and finding out that you need to stop and run to the auto parts store for a relay or an electronics store for some resistor's or whatever, so we include any needed extra relays, diodes, resistors, voltage inverters, etc. needed for your specific vehicle's installation and pre-wire them into the system for you.

 Vehicle Compatibility Guarantee:
You will be asked to indicate the year, make and model of vehicle the system will be installed into during ordering. If in the rare event that one of our technicians finds that the system is not compatible to your specific vehicle, we will immediately void the order and promptly release your payment.