GO STRAIGHT FROM BOX TO INSTALLATION IN UNDER AN HOUR!
OEM grade, vehicle specific ready for hassle-free plug & play installation of factory keyless entry controlled remote starter systems. Factory fit T-harness for all 2007 (New Body Style Only) to 2013 Chevrolet Silverado.
No computer, internet access, trip to the Dealership, Dcryptor™ or Flash programmer required!
Each kit includes a easy to follow step-by-step DIY photo-illustrated installation guide, carries a 3 year QC warranty, and lifetime technical support by phone, email, live chat or even txt, 7 Days a week.
Plug & Play Ready Remote Starter for all 2014 through 2016 Chevrolet Silverado 1500
TECHNCAL NOTE: 2016 Models Manufactured Before 7-01-16 Only (Check Driver's Door Jamb Tag)
Preloaded Vehicle Specific Ready Firmware
Plug & Play T-Harness
Easy Step-by-Step Illustrated Installation Guide
Integrates Automatically with your Factory Remotes:
Activate remote start by pressing lock 3X on your factory keyless entry remotes.
Preheat/Defrost or Precool your Interior: Just preset your HVAC settings where you want them and the system will activate them a few seconds after the vehicle is running by the remote starter.
Key Takeover Benefit:
Remote starter remains running when driver's door is opened. Upon entering the vehicle, when you turn on the ignition and step on the brake to shift into gear, the remote starter will automatically shut off but the vehicle will remain running normally with the key, no need to restart the vehicle.
15 Minute Adjustable Remote Start Run Time:
7 Run times to choose from 3, 5, 10, 15, 25, 30, 35 minutes. If you would like more or less run time you can indicate this in the drop down menu during ordering. Run times can be changed manually any time after installation.
Brake Pedal Shut-Down Feature:
If someone was to enter the vehicle while the vehicle is running by the remote start and they stepped on the brake pedal without turning the ignition on first, the remote starter will shut down.
CHOICE of Remote Start Activation Sequence:
The standard remote start activation procedure is pressing your factory remotes LOCK button 3X, but if you prefer, we can program the system to start by pressing LOCK/UNLOCK/LOCK instead. If you think you would like this sequence better just use the drop down menu provided during ordering.
The most common reason to choose the "LOCK/UNLOCK/LOCK" sequence is if your vehicle's remotes only beep the vehicle's horn when you press lock or unlock twice (a.k.a. "silent choice") and silently locks or unlocks the doors with just one press, then choosing the LOCK, UNLOCK, LOCK remote start activation procedure will silently activate the remote starter without any horn confirmation.
Optional 1-Wire T-Tap Connection for the parking lights to turn ON when running via remote starter. Not a required connection.
Plug&Play Compatible to Carlink ASCL6 Smartphone Control
Plug&Play Compatible to Prestige Z-Series Long Range Remote Upgrades
3 Year "VIP" Warranty: We will repair or replace your system if its found to fail from normal everyday use for a period of 3 years from date-of-delivery. In the rare event that one of our technician's determines a system failure, the technician will email you a prepaid USPS return shipping label for the defective part and have the component repaired or replaced and sent back to you within 5 business days, all covered under warranty at no cost to you! Out of warranty? No problem, you will receive a 10% discount off any replacement part you may need.
If you have any questions, just let us know! Tech's are standing by: Email replies are made within the hour between the hours of: Mon-Fri: 9am-8pm, Sat: 9am-6pm & Sun: 9am-4pm Eastern Time or call-in between these hours at: 1-866-244-8004
PLUG&PLAY REMOTE STARTER STEP-BY-STEP INSTALLATION GUIDE
2007 (NBS)-2013 CHEVROLET SILVERADO EXAMPLE PHOTOS
(YOU CAN CLICK ON PHOTO FOR A LARGER VIEW)
Go straight from box to vehicle to complete installation in less then 60 minutes. Minimal tools are required, just a Phillips screwdriver to remove 2 Phillips screws (or 2 x 7mm) and a 10mm socket wrench to remove 1 x 10mm bolt (neither tool is included) and a plastic panel pry tool (which is included) to remove 3 vehicle panel covers and the vehicle's tilt-lever to access the needed factory harnesses located on the bottom of the steering column under the lower steering column cover.
"You don’t need to go to the dealer and the install takes about ten minutes if you know what you are doing and less than 30 if you are figuring it out. Also the support number they give you is answered by a real person and they know what they are doing and will get you up and running if you need some help. The directions that come with the kit are the easiest and step-by-step. All I had to do was pull the steering column cover, unplug two harnesses, plug them into the harness provided with the kit and run the other ends back into the vehicle harness and presto! Put the cover back on and you are in business. No more going out to a cold truck for this guy."